Brass crystal chandelier – To restore an antique crystal chandelier, there are steps to do it. Fill the sink with warm water and a squirt of dishwashing liquid. Work up foam hands. Look carefully crystal pendants in your brass crystal chandelier. Unhook all the crystals that are the same size. Wash in soapy water, rinse under running water and dry with a paper towel. Place them in a separate place before going to the next set of pendants of different sizes. Repeat this process until all the pieces of glass have been removing and cleaning.
Turn off the circuit chandelier. Remove all lamp bulbs, washing and drying them, as did the glass pendants. Remove the cap ceiling lamp with a screwdriver, exposing wiring. Dissociate wire nuts and ground wire. Determine what type of metal finishing that is trying. Brass is more likely for a brass crystal chandelier. Apply a light coat of enamel bronze to the metal surface. Let it dry and then polish with a soft clean cloth to remove tarnish. Check the wiring for insulation decayed and corroded cable connections. Re-hang each pendant crystal clean as it was before, referring to digital photos to make sure they hang properly.